Advanced Instrument Development, Inc.
2545 CURTISS STREET DOWNERS GROVE, ILLINOIS 60515 USA
TEL: 630-271-9729 FAX: 630-271-9995
► AEC
ROTOR-AID LC100 SERIES
The LC100 Series Rotor Controller is our most compact lightweight rotor controller designed to accelerate and dynamically brake the anode rotors of x-ray tubes. These rotor controllers are ideal for small and medium size x-ray tubes up to approximately 1.0 million heat units.
-
Output power of up to 3kW per phase rapidly accelerates small and medium size x-ray tubes to full speed.
-
Microcontroller programming provides flexibility to accommodate all types of x-ray generators and x-ray tube types. All common procedures are supported: Radiographic and fluoroscopic, as well as spot film, and digital systems.
-
IGBT inverters are used to accelerate the rotor to low or high speed. Phase shift capacitors are employed to provide power to the split phase.
-
Available in standard 19-inch rack mount or free-standing floor mount models.
-
Switching circuitry allows operation of up to two x-ray tubes from a single rotor controller. Individual time switches allow boost and brake times to be set for each x-ray tube independently.
-
LED indicators provide continuous information on the status of the rotor controller and x-ray tube.
-
The LC100 Series is available for "R" and "Q" stators.
-
Plug-in circuit boards and test points are readily accessible.