Advanced Instrument Development, Inc.
2545 CURTISS STREET DOWNERS GROVE, ILLINOIS 60515 USA
TEL: 630-271-9729 FAX: 630-271-9995
► AEC
▼ Rotor-AID
ROTOR-AID LC100 SPECIFICATIONS
Standard Configuration:
Two-Tube radiographic and fluoroscopic 'R' stator (19" rack mount)
Power Requirements:
Nominal 20 Ampere service for 'R' stators and 30 Ampere service for 'Q' stators, single phase 200VAC to 240VAC +5% - 10%, 50/60Hz
Power Output:
Voltage output selected by transformer taps.
Nominal 'R' stator voltages:
High Speed Boost 450VAC
High Speed Run 110VAC
Low Speed Boost 240VAC
Low Speed Run 60VAC
Low Speed Brake 80VDC
Maximum available power output:
For High Speed - nominally 3kW per phase into most 3-wire split stator windings rated for intermittent power levels of up to 500VAC and up to 10 Amperes per winding. The output frequency is 180Hz
For Low Speed - nominally 2.5kW per phase into most 3-wire split stator windings rated for intermittent power levels of up to 250VAC and up to 10 Amperes per winding. The output frequency matches the line frequency (50/60 Hz).
Timer Adjustments:
Individual timers are provided for each x-ray tube to set boost and brake times. Additional timers are available to set continuance (holdover time) and to set time for other functions such as spot hold, and cassette delay.
Physical Parameters:
19" Rack Mount
inches - 5.25H x 19W x 12D
mm - 133H x 483W x 305D
Weight - 40 lbs. (18 kg)
Environmental Characteristics
Ambient Temperature, storage: -20 to +65°
C
Ambient Temperature, operating: +10 to +40°
C
Humidity: 10% to 95%, non-condensing
Certification:
All units ETL certified. Units may also be CETL and IEC601.1 certified when requested and so labeled.
Also available for special applications:
Custom enclosures