Output power of up to 3kW per phase rapidly accelerates small and medium size x-ray tubes to full speed.

Microcontroller programming provides flexibility to accommodate all types of x-ray generators and x-ray tube types. All common procedures are supported: Radiographic and fluoroscopic, as well as spot film, and cine, CT, and digital systems.

IGBT inverters are used to accelerate the rotor to low or high speed. No phase shift capacitors are required because power is supplied at precise phase angles.

Available in standard 19-inch rack mount or free-standing floor mount models.

Switching circuitry allows operation of up to three x-ray tubes from a single rotor controller. Individual time switches allow boost and brake times to be set for each x-ray tube independently.

LED indicators provide continuous information on the status of the rotor controller and x-ray tube.

The ability to run Q, R, and E stators in the same generator system.

Plug-in circuit boards and test points are readily accessible.