Single tube radiographic (19-inch rack mount)

Three-tube radiographic and fluoroscopic (19-inch rack mount)

Substitution of input isolation transformer (adds 5.25"/133mm to height of rack mount; adds 8 lbs./ 4 kg. to overall weight)

Substitution of 277VAC line filter in place of standard 240VAC line filter

Decorative wall mount cabinet

Nominal 30 Amperes, 200-240 +/-10% VAC, 50/60 Hz service required (277VAC with optional line filter).

Unit includes 20 Amperes, 240 VAC circuit breaker and 240V line filter.

Fixed voltage output to tube stator with programmable duty cycles. Changing the duty cycles of the output waveform provides proper stator currents during boost, run and brake.

Maximum available power output:

Nominally 3kW per phase into most 3 wire split-phase stators rated for intermittent power levels of up to 550 VAC and up to 10 Amperes per winding.

Drive frequencies for boost and run are selectable in 2.5 Hz increments;

Low Speed: 25-75.2 Hz

High Speed: 100-197.5 Hz

Individual switches are provided for each x-ray tube to set boost and brake times. Additional switches are provided to set continuance (holdover time) and to set time for an auxiliary function.

Physical Parameters: